+ handling of billets and beam blanks production from the cooling plate of the continuous casting for materials even at high temperatures (up to 650 °C for the electromagnets and up to 600 °C for the electro permanent magnets).
+ Loading and unloading of trucks, railway wagons or ships.
+ Storage in warehouses or depots.
As a result of their construction they are particularly suitable for heavy work even at high temperatures thanks to:
+ Design of the windings with very low current densities that allow the handling of billets up to 650 ° C.
+ High degree of thermal and electrical insulation.
+ Mobile pole electromagnets which, in the presence of billets layers with particularly high displanarity, are able to adapt to the shape of the load.
+The risk of accidents is considerably reduced since the presence of handling personnel is not required near the load.
+ The safety of handling
increases while the cost
of labor is significantly
reduced since the personnel assigned to handling the load does not have to sling the load.
+ The speed of handling increases and logistics costs are reduced.
+ Warehouse areas are exploited to the full, generating an increase in available volumes.
The electromagnets can also be made in a version with a double redundant coil. This grants that, if one of the two coils or its power cable should fail, the second coil will still be able to hold the load in complete safety.
The electromagnets can be used individually or under beams in multiple arrangements.
These beams can be:
+ Motorized extensible, to adapt to the length of the load.
+ Equipped with mechanical safety forks.
The electromagnets are powered by the mains by means of our electronic equipment.
The electro permanent magnets
The electro permanent magnets can be used individually or under crosspieces in multiple arrangement.
Electro permanent magnets combine the features of electromagnets and permanent magnets offering the following advantages:
+ Guaranteed safety: lack of mains voltage or damage to the power cable does not lead to any accidental release of the load. The electro permanent magnets do not require buffer batteries or mechanical safety forks.
+ Constant performance: the electro permanent magnets are free from heating due to the Joule effect.
+ Minimal maintenance required.
+ Reduced environmental impact.
+ Optional: RDF Magnetic Flux Detection Device. It allows, through the direct measurement of the magnetic flux generated, to determine the force expressed by the magnet itself; comparing this data with the weight of the load to be handled identifies the actual safety ratio of the handling.
FILL IN THE FORM,
OUR EXPERTS WILL STUDY THE MOST SUITABLE OPTION FOR YOUR NEEDS.
ALL THE LIFTERS BY APPLICATION: